| Bozilla Corporation has created a unique system designed to make your mold Green. |
 |  |  |  |  |  |
| | | | | |
| Bozilla Corporation Plastics Molding Consulting |
(910) 392-4240
| Copyright ©2007 Bozilla Corporation. All rights reserved. |
| Contact us today to quantify your tool using our Green Validation System. There are no up-front costs and the savings begin immediately. |
This unique system will first quantify your current tool and inform you of how efficient it
is currently running. Examples include molds/tools which may have been sidelined
because they were cut wrong, perhaps the feed systems do not work as expected, cycle
times are too long or are simply known to be inefficient.
Cutting-edge techniques are used to determine if these tools can be optimized so that
they can be brought back to life in their most efficient state.
Each potential issue will be identified accordingly and suggested changes will be provided
in order to create a streamlined, lean-running tool which in turn will be green and
profitable.
Any suggested changes will be submitted to the customer. The customer will take those
suggestions, determine which ones can be utilized, will accept and submit them for
validation.
The system will then optimize the mold/tool and processing conditions based on those
accepted changes and provide a overall solution package.
is currently running. Examples include molds/tools which may have been sidelined
because they were cut wrong, perhaps the feed systems do not work as expected, cycle
times are too long or are simply known to be inefficient.
Cutting-edge techniques are used to determine if these tools can be optimized so that
they can be brought back to life in their most efficient state.
Each potential issue will be identified accordingly and suggested changes will be provided
in order to create a streamlined, lean-running tool which in turn will be green and
profitable.
Any suggested changes will be submitted to the customer. The customer will take those
suggestions, determine which ones can be utilized, will accept and submit them for
validation.
The system will then optimize the mold/tool and processing conditions based on those
accepted changes and provide a overall solution package.
This system was created due to repeated customer requests to help find a solution to
make their current tools more efficient or to find a means by which to make tools which
have been shelved usable again.
If a tool is not efficient or not even running, there are costs involved which are lost. This
system has been proven to recapture those costs and put that money back into your
pocket.
make their current tools more efficient or to find a means by which to make tools which
have been shelved usable again.
If a tool is not efficient or not even running, there are costs involved which are lost. This
system has been proven to recapture those costs and put that money back into your
pocket.
Reduce Energy Consumption
Reduce Waste
- Correctly match the tool with the molding machine (use
the smallest machine necessary) - Reduce cycle times
- Design efficient tools
- Which use less energy to both make and cool the
part - Use less material
- Thinner walled parts
- Less feed system waste
- Select materials more suitable for the application
- Can be recycled
- Easier to process yet meet part requirements
- Create less greenhouse gases
- Create parts which can be recycled and can last longer
Reduce Waste
- Create less scrap
- Have less Material Consumption
- Use tools which have been shelved or sidelined
| You can contact us via our Contacts Page: Contacts OR Send an email to GoGreen@Bozillacorp.com OR Call: (910) 392-4240 |
- Poorly designed feed system causing
excessive scrap - Poorly designed feed system causing
excessive energy consumption of the
molding machine. - Poorly located gate(s) on part causing
high percentages of parts being scrapped - Part too thick causing material waste.
- Part design causing excessive cycle times.
- Incorrect cooling system design causing
excessive cycle times. - Incorrect cooling system design causing
unacceptable parts. - Mold running in too large of a machine
- The list goes on.
| Some typical identifiable issues commonly found in inefficient tools: |
| In order to be Green or Environmentally Friendly, here's what we need to do: |
| The Green Validation Process |
=
| Going "Green" means a more efficient molding process which benefits the environment and your bottom line. |
